640D0063H01 YORK Analog I/O board

Inquire Now Next Product

Product Details：

640D0063H01 YORK Analog I/O board

Brand：YORK Model number：640D0063H01

Country of origin: U.S. Product weight：0.59kg

HS code：9032899099

Product Dimensions：

Condensing units and heat pumps are completely assembled, piped

and wired at the factory to provide a single-piece unit for shipment and rigging. Each unit is pressurized with a holding charge of refrigerant R-410A for storage and/or shipping.

The compact design, clean styling, small footprint, and quiet operation

make these condensing units and heat pumps suitable for almost any

outdoor location. On rooftops... because they weigh much less than a

single package unit of similar capacity and are much easier to rig and

support. On the ground... because the footprint is compact allowing a

variety of applications.

Both the condensing units and heat pumps are equipped with reliable

Smart Equipment™ microprocessor controls to assure proper

operation and unit protection for long product life. Products from 10 to 20 tons are available in single or dual (2 or 4 pipe) refrigerant circuits for redundancy in operation and various applications.

The air handling units are completely assembled units, including a

well-insulated cabinet, a DX cooling coil with copper tubing, aluminum fins, expansion valve(s), distributor(s), 2” throwaway filters, a centrifugal blower, a blower motor, an adjustable belt drive, a blower motor contactor and a small holding charge of nitrogen.

Units are shipped in the vertical position ready for field installation, but can be easily converted to horizontal position. An added benefit of the air handling units is they are designed to operate with either a

condensing unit or a heat pump and no field modification or special

unit is required for heat pump applications.

• Meets or exceeds ASHRAE 90.1 standards.

• Scroll compressors provide both high efficiency and

reliability. Single two-stage scroll available on the 7.5

ton OD unit.

• Smart Equipment™ Controls

• Dual refrigerant circuits on J**PD and J**YD models.

• Condensing unit coils are constructed of reliable and

durable Micro-Channel aluminum tube and fins for long

lasting, efficient operation. Micro-Channel technology

provides exceptional durability along with reduced

product weight and less refrigerant charge. Heat pumps

units are equipped with aluminum fin, copper tube coils

providing durability, reliability and value.

• Crankcase heaters that de-energize when compressors

are operating.

• Both high and low pressure controls. Since these

controls are self-contained, there are no capillary lines

to be damaged.

• Internal compressor motor protection.

• Class 2, 24-volt thermostat control circuit protected by a

re-settable breaker.

• Standard factory installed service valves.

We have the same series of models in stock. If you don't find the model you need, please contact us and we will provide you with an official quotation！

VIPA 972-0DP10

VIPA CPU 315SB (315-2AG12)

VIPA 321-1BL00

VIPA 322-1BL00

VIPA 323-1BH00

VIPA 331-7BF70

VIPA 972-0DP20

VIPA 972-0DP30

KEYENCE LR-TB5000C

KEYENCE CA-MN80

KEYENCE GL-R32L

KEYENCE LR-W500