PXI-6229 National Instruments PXI Multifunction I/O Modules

Inquire Now Next Product

Product Details：

PXI-6229 National Instruments PXI Multifunction I/O Modules

Brand：National Instruments Model number：PXI-6229

Country of origin: United States Product weight：0.17kg

HS code：8517623990

Product Dimensions：

M Series Data Acquisition: 16-Bit, 250 kS/s, 32 AI, 48 DIO, 4 AO

The following specifications are typical at 25 °C, unless otherwise noted. For more information about the NI 6229, refer to the M Series User Manual available at ni.com/

manuals.

Absolute accuracy at full-scale numbers is valid immediately following internal calibration and assumes the device is operating within 10 °C of the last external calibration.

Note Accuracies listed are valid for up to one year from the device external calibration.

The PXI device supports one of the following features:

• May be installed in PXI Express hybrid slots

• Or, may be used to control SCXI in PXI/SCXI combo chassis

Measurement Category I is for measurements performed on circuits not directly connected to

the electrical distribution system referred to as MAINS voltage. MAINS is a hazardous live

electrical supply system that powers equipment. This category is for measurements of voltages

from specially protected secondary circuits. Such voltage measurements include signal levels,

special equipment, limited-energy parts of equipment, circuits powered by regulated lowvoltage sources, and electronics.

Measurement Categories CAT I and CAT O (Other) are equivalent. These test

and measurement circuits are not intended for direct connection to the MAINS

building installations of Measurement Categories CAT II, CAT III, or CAT IV.

We have the same series of models in stock. If you don't find the model you need, please contact us and we will provide you with an official quotation！

NIPCI-6224

NIPCI-8512

NIPCI-8517

NIPCIE-8381

NIPXI-2545

NIPXI-2596

NIPXI-2597

NIPXI-6115

NIPXI-6224

NIPXI-6289

NIPXI-6513

NIPXI-6515