1734-OW4 Allen-Bradley Powerflex 527 1.5kw

Brand：Allen-Bradley Model number：1734-OW4

Country of origin: United States Product weight：0.040kg

HS code：8471800000

Product Details：

1734-OW4 Allen-Bradley Powerflex 527 1.5kw

Product Dimensions

Representative Photo Only (actual product may vary based on configuration selections) Point I/O Coil NO DPST 4 Relay Module, 24 V DC

· Input, output, and relay output modules

· Wide variety of voltages

· Point-level output fault states for short-circuit and wireoff diagnostics

· Field-side diagnostics on select modules

· Choice of direct-connect or rack-optimised communications

· POINT Guard I/O™ modules for safety applications

· Configurable modules - each point can be configured as a DC input or output

· DeviceLogix™ technology available

Installing the Wiring Base 1. Position wiring base vertically above installed units (interface, power supply or existing module. 2. Slide the wiring base down allowing the interlocking side pieces to engage the adjacent module or interface. 3. Press firmly to seat the wiring base on the DIN rail. The wiring base will snap into place. 4. To remove the wiring base from the DIN rail, remove the module, and use a small bladed screwdriver to rotate the base locking screw to a vertical position. This releases the locking mechanism. Then lift straight up to remove. Installing the Removable Terminal Block A removable terminal block is supplied with your terminal base. To remove, pull up on the RTB removal handle.

We have the same series of models in stock. If you don't find the model you need, please contact us and we will provide you with an official quotation！

Allen-Bradley 440G-TZS21UPRH

Allen-Bradley 700-HLS1U2

Allen-Bradley 1440-SDM02-01RA

Allen-Bradley 1492-IFM40F-3

Allen-Bradley 1746-A10

Allen-Bradley 1746-NI4

Allen-Bradley 1746-NI8

Allen-Bradley 1747-L541

Allen-Bradley 1747-L552

Allen-Bradley 1756-A4

Allen-Bradley 1756-A10

Allen-Bradley 1756-A13