1734-IK Allen-Bradley point I/O 8 Safety Output Module

Brand：Allen-Bradley Model number：1734-IK

Country of origin: United States Product weight：0.090kg

HS code：8471800000

Product Details：

1734-IK Allen-Bradley point I/O 8 Safety Output Module

Product Dimensions：

The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The module can be installed before, or after

base installation. Make sure that the wiring

base is correctly keyed before installing the

module into the wiring base. In addition,

make sure the wiring base locking screw is

positioned horizontal according to the base.

1. Using a bladed screwdriver, rotate the

keyswitch on the wiring base clockwise to

until the number required for the type of

module being installed aligns with the

notch in the base.

2. Make certain the DIN rail locking screw is

in the horizontal position. (You cannot

insert the module if the locking

mechanism is unlocked.)

3. Insert the module straight down into the

wiring base and press to secure. The

module will lock into place

The module can be installed before, or after

base installation. Make sure that the wiring

base is correctly keyed before installing the

module into the wiring base. In addition,

make sure the wiring base locking screw is

positioned horizontal according to the base.

1. Using a bladed screwdriver, rotate the

keyswitch on the wiring base clockwise to

until the number required for the type of

module being installed aligns with the

notch in the base.

2. Make certain the DIN rail locking screw is

in the horizontal position. (You cannot

insert the module if the locking

mechanism is unlocked.)

3. Insert the module straight down into the

wiring base and press to secure. The

module will lock into place

The module can be installed before, or after

base installation. Make sure that the wiring

base is correctly keyed before installing the

module into the wiring base. In addition,

make sure the wiring base locking screw is

positioned horizontal according to the base.

1. Using a bladed screwdriver, rotate the

keyswitch on the wiring base clockwise to

until the number required for the type of

module being installed aligns with the

notch in the base.

2. Make certain the DIN rail locking screw is

in the horizontal position. (You cannot

insert the module if the locking

mechanism is unlocked.)

3. Insert the module straight down into the

wiring base and press to secure. The

module will lock into place

The module can be installed before, or after

base installation. Make sure that the wiring

base is correctly keyed before installing the

module into the wiring base. In addition,

make sure the wiring base locking screw is

positioned horizontal according to the base.

n encoder/counter module serves as a signal conditioner, function block, and counter between the customer process signals on the terminal base and the POINTBus containing the command information. The main functional blocks are the the following.

•Customer digital I/O interface

•Counter ASIC

•Microprocessor

The encoder/counter module accepts feedback from the following.

•Encoders (either single-ended or differential)

•Pulse generators

•Mechanical limit switches

•Frequencies up to 1 MHz

A filter is available with the following settings.

•50 Hz

•500 Hz

•5 kHz

•50 kHz

Plan View Drawings (3D Format)
Catalog Number	Page	AutoCAD® (DWG)	Drawing Interchange Format (DXF)	Adobe® PDF	Windows Meta-File (WMF)
1734-IK		N/A	N/A	N/A	N/A

We have the same series of models in stock. If you don't find the model you need, please contact us and we will provide you with an official quotation！

Allen-Bradley 440G-TZS21UPRH

Allen-Bradley 700-HLS1U2

Allen-Bradley 1440-SDM02-01RA

Allen-Bradley 1492-IFM40F-3

Allen-Bradley 1746-A10

Allen-Bradley 1746-NI4

Allen-Bradley 1746-NI8

Allen-Bradley 1747-L541

Allen-Bradley 1747-L552

Allen-Bradley 1756-A4

Allen-Bradley 1756-A10

Allen-Bradley 1756-A13