1734-top Allen-Bradley Interface,IO Link,Distributed I/O,4-Point

Brand：Allen-Bradley Model number：1734-top

Country of origin: United States Product weight：0.240kg

HS code：8471800000

Inquire Now Next Product

Product Details：

1734-top Allen-Bradley Interface,IO Link,Distributed I/O,4-P

Product Dimensions

Terminal Base, POINT I/O, One Piece, 12 Screw-Clamp Terminals, Open Style, DIN Mounted• This equipment is not resistant to sunlight or other sources of UV radiation. • This equipment shall be mounted in an ATEX/IECEx Zone 2 certified enclosure with a minimum ingress protection rating of at least IP54 (in accordance with EN/IEC 60079-15) and used in an environment of not more than Pollution Degree 2 (as defined in EN/IEC 60664-1) when applied in Zone 2 environments. The enclosure must be accessible only by the use of a tool. • This equipment shall be used within its specified ratings that are defined by Rockwell Automation®. • Provision shall be made to prevent the rated voltage from being exceeded by transient disturbances of more than 140% of the peak rated voltage when applied in Zone 2 environments. • The instructions in the user manual shall be observed. • This equipment must be used only with ATEX certified Rockwell Automation backplanes. • Earthing is accomplished through mounting of modules on rail. • Devices shall be used in an environment of not more than Pollution Degree 2

ATTENTION: If this equipment is used in a manner that is not specified by the manufacturer, the protection that is provided by the equipment may be impaired. ATTENTION: Read this document and the documents that are listed in the Additional Resources section about installation, configuration, and operation of this equipment before you install, configure, operate, or maintain this product. Users are required to familiarize themselves with installation and wiring instructions in addition to requirements of all applicable codes, laws, and standards. ATTENTION: Installation, adjustments, putting into service, use, assembly, disassembly, and maintenance are required to be carried out by suitably trained personnel in accordance with applicable code of practice. ATTENTION: In case of malfunction or damage, no attempts at repair should be made. The module should be returned to the manufacturer for repair. Do not dismantle the module. ATTENTION: This equipment is certified for use only within the surrounding air temperature range of -20…+55 °C (-4…+131 °F). The equipment must not be used outside of this range. ATTENTION: Use only a soft dry anti-static cloth to wipe down equipment. Do not use any cleaning agents.

We have the same series of models in stock. If you don't find the model you need, please contact us and we will provide you with an official quotation！

Allen-Bradley 440G-TZS21UPRH

Allen-Bradley 700-HLS1U2

Allen-Bradley 1440-SDM02-01RA

Allen-Bradley 1492-IFM40F-3

Allen-Bradley 1746-A10

Allen-Bradley 1746-NI4

Allen-Bradley 1746-NI8

Allen-Bradley 1747-L541

Allen-Bradley 1747-L552

Allen-Bradley 1756-A4

Allen-Bradley 1756-A10

Allen-Bradley 1756-A13