1420-V2-ENT Allen-Bradley Bulletin 1420 PowerMonitor 500

Brand：Allen-Bradley Model number：1420-V2-ENT

Country of origin: United States Product weight：2.13kg

Inquire Now Next Product

Product Details：

1420-V2-ENT Allen-Bradley Bulletin 1420 PowerMonitor 500

Product Dimensions：

· Quick and easy to install

· Modern design

· High accuracy monitoring and measurement to IEC 62053-21

· Easy to read and configure

· Options for remote communication including Ethernet/IP

· Very high sample rate to capture harmonics and sub transients

· User settable alarm configuration• Product dimensions

To prepare the PowerMonitor 500 unit for the firmware installation, follow these steps. 1. Configure a personal computer with a fixed IP address of 192.168.1.x (where x ≠ 10) on its wired Ethernet network port.

2. Make a note of the existing PowerMonitor 500 unit Ethernet network IP address and Modbus/TCP port.

3. Enter programming mode through the front display of the PowerMonitor 500 and navigate to the Ethernet menu (menu page 130).

4. Configure the PowerMonitor 500 to use a fixed IP address of 192.168.1.10 (required) and port 502 for Modbus/TCP. See Chapter 3 of the PowerMonitor 500 Unit user manual, publication 1420-UM001, for more information on how to configure the Ethernet settings of the PowerMonitor 500 unit.

5. Connect the PowerMonitor 500 unit to the personal computer Ethernet port by using a crossover or straight-through(1) patch cable. The connection must be point-to-point without a router or any other network devices.

We have the same series of models in stock. If you don't find the model you need, please contact us and we will provide you with an official quotation！

Allen-Bradley 440G-TZS21UPRH

Allen-Bradley 700-HLS1U2

Allen-Bradley 1440-SDM02-01RA

Allen-Bradley 1492-IFM40F-3

Allen-Bradley 1746-A10

Allen-Bradley 1746-NI4

Allen-Bradley 1746-NI8

Allen-Bradley 1747-L541

Allen-Bradley 1747-L552

Allen-Bradley 1756-A4

Allen-Bradley 1756-A10

Allen-Bradley 1756-A13